Conveyor Rail Element Sensor
Jump to navigation
Jump to search
This article is a stub. You can help Oxygen Not Included Wiki by expanding it.
Conveyor Rail Element Sensor
Sends a Green Signal when the selected item is detected on a rail.
Element sensor can be used to detect the presence of a specific item on a rail.
Dimensions
1×1 tiles
Category
-4 (Radius: 1 tile)
Green: The configured item is on the rail
Red: The configured item is not on the rail
Red: The configured item is not on the rail
Materials
25 kg
Conveyor Rail Element Sensor is an automation sensor that detects the content of a Conveyor Rail. It has an element filter for the player to choose a type of element. It must be built in the same tile as a Conveyor Rail segment. When the chosen element is detected in the rail, it will output a Green signal. Otherwise it will output a Red signal.
If the rail is empty, it outputs a Red signal.
Usage
Conveyor Rail Element Sensor combined with Conveyor Shutoff works just as Solid Filter, but consumes less power (10 W vs. 120 W).
History
- AP-397125: Introduced.
