Gas Pipe Thermo Sensor

Gas Pipe Thermo Sensor
Sends a Green Signal or a Red Signal when pipe contents enter the chosen Temperature range.
Thermo sensors disable buildings when their pipe contents reach a certain temperature.
Research	HVAC
Dimensions	1×1 tiles
Category	Ventilation
Decor	-5 (Radius: 1 tile)
Auto Out	Green: When the temperature of pipe content meets the criteria Red: When the temperature of pipe content does not meet the criteria
Materials
Refined Metal	25 kg

Gas Pipe Thermo Sensor is an automation sensor to detect the temperature of gas content in a Gas Pipe.

The thermo sensor has a setting for temperature and can be configured as either above or below this setting. It must be built in the same tile as a gas pipe segment. When the temperature of gas content in the pipe segment meets the configured criteria, the sensor will send a Green signal. Otherwise it will send a Red signal.

If the pipe segment is empty, the sensor retains the previous value.

History

• LU-369994: Conduit Sensors update based on the last value measured when no elements is in the conduit.

see all buildings