Conveyor Rail Thermo Sensor
Jump to navigation
Jump to search
This article is a stub. You can help Oxygen Not Included Wiki by expanding it.
Conveyor Rail Thermo Sensor
Sends a Green Signal or a Red Signal when rail contents enter the chosen Temperature range.
Thermo sensors disables buildings when their rail contents reach a certain temperature.
Dimensions
1×1 tiles
Category
-4 (Radius: 1 tile)
Green: The contained item is within the selected Temperature range
Red: Otherwise
Red: Otherwise
Materials
25 kg
Conveyor Rail Thermo Sensor is an automation sensor to detect the temperature of debris content in a Conveyor Rail.
The thermo sensor has a setting of temperature and can be configured as either above or below this setting. It must be built in the same tile as a Conveyor Rail segment. When the temperature of debris content in the rail meets the configured criteria, the sensor will send a Green signal. Otherwise it will send a Red signal.
If the rail is empty, the sensor retains the previous value.
History
- AP-397125: Introduced.
