Liquid Filter
Jump to navigation
Jump to search
Liquid Filter
Sieves one Liquid out of a mix, sending it into a dedicated Filtered Output Pipe.
Can only filter one liquid type at a time.
Can only filter one liquid type at a time.
All liquids are sent into the building's output pipe, except the liquid chosen for filtering.
Dimensions
3×1 tiles
Rotation
Turnable
Category
−120 W
+4 kDTU/s
Overheat at
75 °C167 °F
-5 (Radius: 1 tile)
Input: Liquid Intake
Output: Filtered Liquid Output
Other Liquid Output
Output: Filtered Liquid Output
Other Liquid Output
Green: Enable
Red: Disable
Red: Disable
Materials
200 kg
Liquid Filter removes the selected Liquid out of a stream of an inbound liquid mixture, sending it into a separate, filtered output Pipe.
It works the same way as its Gas Counterpart, essentially "teleporting" packet of liquids to their respective output.
Usage
In order to use a Liquid Filter, just connect it to Liquid Pipes and a Wire. Once it is constructed, a filter can be selected immediately.
Some useful notes:
- The Liquid Filter will not let any liquid pass through without power.
- It will consume power regardless of which output the liquid is sent to (this also applies to when the filter element is set to "none.")
- If no filtered output is selected, all incoming liquid packets will be sent to the regular output.
For further usage examples and alternatives, see Gas Filter.
Trivia
- The Liquid Filter model resembles a Francis Turbine, a type of water turbine.
