Signal Distributor
Jump to navigation
Jump to search
This article may be outdated. It was last updated for AP-398142. These versions were tagged as updating the game mechanics discussed here: U51-596100
Signal Distributor
Control A toggles between the outputs in the selector switches. Control B toggles between the two selector switches to determine which output receives a Green or Red signal from the input.
Up to four outputs can be toggled to determine which recieves the signal from one input.
Dimensions
3×4 tiles
Rotation
Turnable
Category
-5 (Radius: 1 tile)
Materials
25 kg
Signal Distributor is a Demultiplexer Automation Building which can route one signal to one of four outputs. The signal is routed based upon two control inputs.
Signal Distributor
The Signal Distributor has three inputs.
- Input Signal - represented with a circle around it
- Most Significant Control (MSC) - directly opposite the input Signal and tied to the highest point of the triangle on the component
- Least Significant Control (LSC) - next to the MSC and in the middle of the triangle on the component
The Input Signal will be sent to one and only one of the four output ports. The remaining output ports will be sent a red signal. The highest numbered output (3) is the one closest to the input signal. The outputs are in sequential order with the lowest numbered output (0) furthest from the input signal and next to the LSC input.
Truth Table
| MSC Input | LSC Input | Output 3 | Output 2 | Output 1 | Output 0 |
|---|---|---|---|---|---|
| Red | Red | Red | Red | Red | Input Signal |
| Red | Green | Red | Red | Input Signal | Red |
| Green | Red | Red | Input Signal | Red | Red |
| Green | Green | Input Signal | Red | Red | Red |
Blueprints
|
