Atmo Suit Dock

Atmo Suit Dock
Stores and recharges Atmo Suits. Build next to an Atmo Suit Checkpoint to make Duplicants change into suits when passing by.
An atmo suit dock will empty atmo suits of waste, but only one suit can charge at a time.
Research	Hazard Protection
Dimensions	1×3 tiles
Category	Stations
Power	-120 W
Overheat at	75 °C
Decor	+10 (Radius: 2 tiles)
Ventilation	Input: Oxygen
Storage Capacity	Oxygen 200 kg
Auto In	Green: Enable Red: Disable
Other Properties	Susceptible to flooding
Materials
Refined Metal	100 kg

Atmo Suit Dock is a building that stores one Atmo Suit and fills it with Oxygen. It must be built adjacent to either an Atmo Suit Checkpoint or another Dock that is adjacent to a Checkpoint. A row of Docks may be built for a single Checkpoint as long as all the buildings are adjacent.

Atmo Suit Docks require Oxygen piping and Power to work. Piping gases other than Oxygen will damage the Atmo Suit Dock.

Tips

• When you inspect a dock that contains a suit, the Contents shows "Atmo Suit x 1: 200kg @ xx ºC". That is the mass of the suit, not its oxygen load. To see how much oxygen the suit contains, click on that line to select the suit itself.
• Power is consumed only when oxygen is being loaded into atmo suits. The dock has a maximum throughput of 1000g/s.
• Standard dupes breathe 100 g/s, therefore a suit needs to recharge 1s for each 18s it was worn. Docks draw 120 W, hence wearing a suit uses 6.67W.

History

• U39-490154:
• Fixed issue causing Jet Suits to be delivered to Atmosuit Docks.
• Fixed issue causing Lead Suits to be delivered to Atmosuit Docks.

see all buildings