Atmo Suit Checkpoint

Atmo Suit Checkpoint
Marks a threshold where Duplicants must change into or out of Atmo Suits. Must be built next to an Atmo Suit Dock.
Can be rotated before construction. A checkpoint must have an atmo suit dock built on the opposite side its arrow faces.
Research	Hazard Protection
Dimensions	1×3 tiles
Rotation	Mirrored
Category	Stations
Overheat at	75 °C
Decor	+10 (Radius: 2 tiles)
Auto In	Green: Enable Red: Disable
Other Properties	Susceptible to flooding
Materials
Refined Metal	100 kg

An active Atmo Suit Checkpoint prohibits Duplicants from passing without an Atmo Suit. Atmo Suit Docks must be built adjacent to the checkpoint and on the opposite side the arrow points toward. It can be automated to only require Duplicants to wear Atmo Suits if the atmospheric conditions in the designated area are suitable for Duplicant survival through Atmo, Gas Element, Thermo, or even Radiation Sensors.

Atmo Suit Checkpoint has a Clearance setting. When a Duplicants wearing an Atmo Suit returns, there may be no empty Atmo Suit Dock to store the used Atmo Suit. In this case, setting the clearance to Always Permitted will allow the Duplicant to pass. The Atmo Suit will be placed on the floor. Setting the clearance to Vacancy will prohibit the Duplicant to pass. This setting is helpful when you have multiple Atmo Suit Checkpoint exits.

Note: When Duplicants change out of a worn Atmo Suit, the oxygen will drop on the ground as bottled oxygen

History

• U50-581979: An Automation port has been added to the Atmo Suit Checkpoint to toggle the Buidling on and off.

see all buildings